Rail Pipe

CS-PW Pipe Welder (Guide Rail type)

1. The welder drives on the Guide rail
2. It makes easily required results through a travel, changing weaving width.
3. It can control weaving width, right-left stop period and center movement.

Comments Off on CS-PW Pipe Welder (Guide Rail type)

2025년 07월 31일

Rail Pipe

CS-100CP LCD Automatic Multi-Layers Welder for Pipe

1. It is possible to control the motor by memorizing the start position and angle of the torch for each multi-layer PASS.
2. The welder weldes pipes.
3. It searches for welding points along the rail and is suitable for horizontal welding position.
4. By controlling the location and angle of the torch with a motor, the operator's fatigue can be reduced through the convenience of operation and the reduced setting time of the equipment.
5. The fixing device for the pipe rail is manufactured as a unit, so it is possible to apply transformation up to ±50Ø of the pipe size.

Comments Off on CS-100CP LCD Automatic Multi-Layers Welder for Pipe

2025년 07월 23일

Rail Pipe

CS-100P Pipe Welder

1. The welder weldes pipes.
2. It searches for welding points along the rail and is suitable for horizontal and vertical-up welding position.
3. CS-100P is applicable for the Pipe more than 250mm’s diameter.
4. The size of each Pipe Rail is readjustable by ±50mm’s diameter.
5. The fixing device for the pipe rail is manufactured as a unit, so it is possible to apply transformation up to ±50Ø of the pipe size.

Comments Off on CS-100P Pipe Welder

2025년 07월 22일

Rail Mounted

CS-TB100C Battery powered Butt / Fillet weaving welder for Tig

1. It is a weaving welder of multi-positions driving on the aluminum rigid rail, and it can be easily controlled by the panel controller and the remote controller.
2. The stop sensors of its both sides stop the welder automatically when a welding job is completed.
3. Controlling the weaving width, the desired leg length can be acquired in a travel.
4. It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired.
5. The position of the rail can be easily readjusted by the on-off magswitches.
6. It is specialized in TIG weaving welding( installed with high frequency dedicated TIG PCB )

Comments Off on CS-TB100C Battery powered Butt / Fillet weaving welder for Tig

2025년 07월 22일

Rail Mounted

CS-GW LCD Automatic Multi-Layers Welder

1. Storable the starting position and angle value of the torch for each multi-layer PASS.
2. [Semi-automatic mode] Torch is automatically moved to the memorized starting position with the angle value of the next work PASS when ongoing PASS welding is completed.
3. [Manual mode] The origin return button is pressed, and torch is moved to the memorized starting position with angle value of the next work PASS.
4. Up to 15 PASS, working condition values can be set and saved.
5. Mechanical downsizing and simplification of equipment enables welding in narrow spaces and short sections.
6. By adjusting the position of the magnets on the rail, the rail can be easily installed on site.

Comments Off on CS-GW LCD Automatic Multi-Layers Welder

2025년 03월 11일

Rail Mounted

CS-SAW S.A.W Welder – Digital 4.3 Type

1. The welder is compact and lightweight, so it can be moved easily and conveniently.
2. Productivity can be improved and welding cost can be reduced in flat position SAW welding work.
3. A weaving device is installed so that even thick base materials can be welded, and the weaving width can be adjusted according to the thickness.
4. There is a left and right stop function to prevent insufficient penetration and undercut during weaving welding.
5. It is possible to do precise control digitally such as running speed, weaving width, weaving speed, left stop, right stop and etc.
6. Using the lightweight rail with magswitch, the welder can be conveniently moved and easily installed.

Comments Off on CS-SAW S.A.W Welder – Digital 4.3 Type

2025년 03월 11일

Rail Mounted

CS-SAW S.A.W Welder – Analog type

1. The welder is compact and lightweight, so it can be moved easily and conveniently.
2. Productivity can be improved and welding cost can be reduced in flat position SAW welding work.
3. A weaving device is installed so that even thick base materials can be welded, and the weaving width can be adjusted according to the thickness.
4. There is a left and right stop function to prevent insufficient penetration and undercut during weaving welding.
5. It is possible to do precise control digitally such as running speed, weaving width, weaving speed, left stop, right stop and etc.
6. Using the lightweight rail with magswitch, the welder can be conveniently moved and easily installed.

Comments Off on CS-SAW S.A.W Welder – Analog type

2025년 03월 11일

Rail Mounted

CS-100C Butt & Fillet Weaving Welder

1. It is a weaving welder of multi-positions driving on the aluminum rigid rail, and it can be easily controlled by the panel controller and the remote controller.
2. The stop sensors of its both sides stop the welder automatically when a welding job is completed.
3. Controlling the weaving width, the desired leg length can be acquired in 1 time travelling.
4. It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired.
5. The position of the rail can be easily readjusted by the on-off magswitches.
6. The travel speed in Cm/Min or Inch/Min programmable in acc with the user manual.

Comments Off on CS-100C Butt & Fillet Weaving Welder

2025년 03월 11일

Rail Mounted

CS-201 Butt & Fillet Multipurpose Welder

1. The position of the rail can be easily readjusted by the on-off magswitches.
2. It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired.
3. The crater filling function provides excellent welding quality at the beginning and end of welding.
4. The travel speed in Cm/Min or Inch/Min programmable in acc with the user manual.

Comments Off on CS-201 Butt & Fillet Multipurpose Welder

2025년 03월 11일

Rail Mounted

CS-100H Horizontal Weaving Welder

1. It is a horizontal weaving welder of multi-positions driving on the aluminum rigid rail, and it can be easily controlled by the panel controller and the remote controller.
2. The stop sensors of its both sides stop the welder automatically when a welding job is completed.
3. Controlling the weaving width, the desired leg length can be acquired in 1 time travelling.
4. It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired.
5. The position of the rail can be easily readjusted by the on-off magswitches.
6. The travel speed in Cm/Min or Inch/Min programmable in acc with the user manual.

Comments Off on CS-100H Horizontal Weaving Welder

2025년 03월 11일