CS-61WC Butt & Fillet Weaving Welder, 3D Curved
Rail Traveling Fillet
Rail Guide
CS-61WC
CS-61WC Butt & Fillet Weaving Welder, 3D Curved is a high-performance device for 3D fillet and butt welding on curved surfaces. Equipped with flexible guide rails, it easily sets up for welding in all 3D directions. The constant speed and minimal backlash design enhance welding quality.
Download Catalog
Detail Info
• The welder drives on the wheels with the guide rollers moving on the flexible rail, and it is
controlled by the panel controller and the remote controller.
• The stop sensors of its both sides stop the welder automatically when a welding job is completed.
• It drives at a constant speed with the minimized gear backlash. Thus the high welding quality
and the long life span of the welder is acquired.
• Controlling the weaving width, the desired leg length can be acquired Through a travel.
• The position of the rail can be easily readjusted by the on-off magswitches.
| DIVISION | CS-61WC | |||
|---|---|---|---|---|
| General | AC Input Power | AC 100V~240V 50/60Hz | ||
| DC Input Power(Option) | AC 48V | DC 18-72V(Option) | ||
| Dimensions | 344(W) X 246(L) X 255(H) | |||
| Weight | 7.9Kg | |||
| Body | Driving Method | 4 WHEELS DRIVEN | ||
| Traveling Speed | 0~98 cm/min | |||
| Traveling Motor | DC 24V, 12W, 5000RPM BLDC MOTOR | |||
| Torch | Up / Down Distance | 0~35mm ±5% | ||
| Front / Back Distance | 0~35mm ±5% | |||
| Weaver | Weaving Motor | DC 24V, 12W, 5000RPM BLDC MOTOR | ||
| Reducer | 1000 : 1 | |||
| Weaving Width | 4˚ | |||
| Weaving Speed | 0~5 rpm/min | |||
| Left / Right Stop time | 0.0~9.9(sec) | |||
| Center Shift | 0˚ ~ 360˚ | |||
| Operating Distance of RC | 10m | |||
| Rail | Fixing | Magnet ON / OFF type | ||
| Material / Size | MC NYLON / 1.5M / 3.4Kg | |||
| Welding Position | Fillet | Groove | PIPE |
| 2F, 3F | 1G, 3G | 2G |
