Skip to content
- It is a horizontal weaving welder of multi-positions driving on the aluminum rigid rail, and it can be easily controlled by the panel controller and the remote controller.
- The stop sensors of its both sides stop the welder automatically when a welding job is completed.
- Controlling the weaving width, the desired leg length can be acquired in 1 time travelling.
- It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired.
- The position of the rail can be easily readjusted by the on-off magswitches.
- The travel speed in Cm/Min or Inch/Min programmable in acc with the user manual.
- The non-welding section of the T-Bar was minimized.
- The position of the rail can be easily readjusted by the on-off mag switches.
- 1 machine can be used for both of left and right welding.
- It is specialized in Corner and T-Bar welding.
- The welder drives on the wheels with the guide rollers moving on the flexible rail, and it is controlled by the panel controller and the remote controller.
- The stop sensors of its both sides stop the welder automatically when a welding job is completed.
- It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired.
- Controlling the weaving width, the desired leg length can be acquired in 1 time travelling.
- The position of the rail can be easily readjusted by the on-off magswitches.
- The travel speed in Cm/Min or Inch/Min programmable in acc with the user manual.
- It is a butt multi-layers welder for the outer side of pipe and vessel, and the diameter should be more than 2000mm.
- The welder drives on the wheels with the guide rollers moving on the flexible rail, and it is controlled by the panel controller and the remote controller.
- The stop sensors of its both sides stop the welder automatically when a welding job is completed.
- Min. above 3 meter bending radius of the rail and easy to in-line by Magnet On-Off switch.
- It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired.
- Controlling the weaving width, the desired leg length can be acquired in 1 time travelling.
- Using magnet release handle, it can be easily mounted and dismounted.
- CS-100C TYPE, CS-100C TYPE (FLEXIBLE), CS-100C TYPE (VACUUM)
- CS-7WC TYPE (FLEXIBLE)
- CS-EGW RAIL
- CS-GW TYPE
- CS-PW TYPE
- CS-100CP TYPE
- It is a vertical-up, fillet weaving welder, and controlled by the panel controller and the remote controller.
- It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired.
- Controlling the weaving width, the desired leg length can be acquired in 1 time travelling.
- Using magnet release handle, it can be easily mounted and dismounted.
- The travel speed in Cm/Min or Inch/Min programmable in acc with the user manual.
- It is a vertical-up, fillet weaving welder, and controlled by the panel controller and the remote controller.
- It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired.
- Controlling the weaving width, the desired leg length can be acquired in 1 time travelling.
- Using magnet release handle, it can be easily mounted and dismounted.
- The travel speed in Cm/Min or Inch/Min programmable in acc with the user manual.
- Using magnetism created from the wheels, it can be stuck on the base material.
- It does not need the rail to travel on.
- It makes easily required results through a travel, changing weaving width.
- It can control weaving width, right-left stop period and center movement.
- It is a multipurpose weaving welder capable of bottom view, vertical position fillet and butt welding.
- The seam is traced by the guide rollers, and the strong magnets are built in the welder.
- Controlling the weaving width, the desired leg length can be acquired in 1 time travelling. The weaving width, left stop, right stop and center movement can be electronically controlled.
- It can be controlled by the panel controller and the remote controller.
- It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and the long life span of the welder is acquired.
- Using magnet release handle, it can be easily mounted and dismounted.
- Using magnetism created from the wheels, it can be stuck on the base material.
- It does not need the rail to travel on.
- It makes easily required results through a travel, changing weaving width.
- It can control weaving width, right-left stop period and center movement.
- Y/Z Automatic slide: Control by local panel and remote controller.
Translate »
