CS-100H Horizontal Weaving Welder
Home » Products » Rail Travelling Fillet » Rail Mounted » CS-100H Horizontal Weaving Welder
Detail Info
• It is a horizontal weaving welder of multi-positions driving on the aluminum rigid rail, and it can
be easily controlled by the panel controller and the remote controller.
• The stop sensors of its both sides stop the welder automatically when a welding job is completed.
• Controlling the weaving width, the desired leg length can be acquired through a travel.
• It drives at a constant speed with the minimized gear backlash. Thus the high welding quality and
the long life span of the welder is acquired.
• The position of the rail can be easily readjusted by the on-off magswitches.
DIVISION | CS-100H | |||
---|---|---|---|---|
General | AC Input Power | AC 100V~240V 50/60Hz | ||
DC Input Power(Option) | AC 48V | DC 18-72V(Option) | ||
Dimensions | 467(W) X 243(L) X 240(H) | |||
Weight | 7.5Kg | |||
Body | Driving Method | Rack-Pinion Driven | ||
Traveling Speed | 0~88 cm/min | |||
Traveling Motor | DC 24V, 12W, 5000RPM BLDC MOTOR | |||
Torch | Up / Down Angle | 0~40mm ±5% | ||
Front / Back Distance | 0~65mm ±5% | |||
Running Angle | ±5% | |||
Weaver | Weaving Motor | DC 24V, 12W, 5000RPM BLDC MOTOR | ||
Reducer | 100 : 1 | |||
Weaving Width | 0~50mm | |||
Weaving Speed | 0~5 rpm/min | |||
Left / Right Stop | 0.0~9.9(sec) | |||
Center Shift | 0˚ ~ 360˚ | |||
Operating Distance of RC | 10m | |||
Rail | Fixing | Magnet ON/OFF Type | ||
Material / Size | AL / 1.5M / 5.4kg |
Welding Position | Fillet | Groove | PIPE |
2G |
